1. Installation Work:
a) All electrical installation work will comply with BS7671: and any amendments in force at the time of the
works.
b) All electrical installation work will comply with applicable Building Regulations in force at the time of the works.
c) Where work is to extend or modify existing circuits, costs quoted assume that the existing installation is in
adequate condition and complies with minimum current regulations. Any works found required to bring the
necessary parts of the existing installation up to standard will be at additional cost.
d) Unless stated otherwise, all cables will be concealed by chasing into the building fabric or concealed in building
voids, under floors, etc. Where impracticable, cabling will be neatly surface run, either clipping direct or housed
in trunking / conduit.
e) Where carpet or flooring coverings may require lifting to allow concealed installation work, no charge is made
for this service, with best endeavours being made to avoid damaging them and to refit them to an acceptable
standard. However, consideration of employing a specialist fitter may be prudent, at your cost to effect a fully
satisfactory reinstatement.
f) Where walls require chases , all filling(bonding), final finishing skim coat plaster and final decoration is
excluded.
g) All endeavours will be made to undertake installation work to a clean standard, using dust sheets and vacuum
cleaning equipment as necessary.
h) The contract outlines the expected duration of the installation work.
i) Whilst undertaking the installation work at the property, the client is required to provide water and power free of
charge
2. EXCLUSIONS:
a) Clearing and / or moving furniture and other items blocking access to work areas are not included.
b) Except where detailed, builders work (creating of holes larger than 50mm diameter, creating of support
structures, etc) are not included, except as outlined in 1d, e and f above.
c) Re-decoration and final making good is excluded from quoted costs, unless specifically detailed as included.
d) Removal from site and disposal of rubble, fittings, wiring, materials, general waste and packaging is not
included.
3. EXTRAS AND VARIATIONS:
a) All extras and variations must be agreed in writing prior to commencement.
4. PRICING:
a) The costs quoted assume continuous and unhindered access to the site by prior arrangement with you.
b) Unless stated otherwise, the costs quoted assume standard working hours between the hours of 08.00 hrs –
17.00 hrs Monday to Friday inclusive. Work required outside these hours may attract out of hours premium
rates.
c) Any additional work not covered in our quoted costs will incur an additional fee and will be agreed with client
before works can commence.
d) All figures quoted are valid for a date of 30 days from the date of the estimate or quotation.
e) All payments are due on completion.
f) Total costs are estimated only, additional costs may be accrued.
5. DEVIATIONS FROM BUILDING REGULATIONS AND BS7671:
a) All work where applicable, will be executed fully in compliance with applicable Building Regulations and BS7671
in force at the time of the work, particularly in respect of work in dwellings to allow the legal Part P obligations to
be met. Where a Client requires deviation from such regulations, a written instruction and record will be
required.
6. RISK AND TITLE OF GOODS AND PROPERTY:
a) The risk in all goods supplied shall pass to the Client upon delivery.
b) All goods supplied shall remain the property of Bright Sparks Electrical Ltd until all sums due have been paid
in full.
c) The client is responsible for ensuring that the property is insured for the duration of the installation work.
7. WARRANTEE:
a) Bright Sparks Electrical Ltd warrants its installation work to be defect free for a period of twelve months from
invoice date. Such cover does not extend to goods not supplied by Bright Sparks Electrical Ltd, physical
damage to products, or any instance where the original installation has been altered or tampered with
subsequently by third parties.
8. PAYMENT:
a) Unless agreed in writing payment in full must be made on completion of the specified works to Bright Sparks Electrical Ltd.
b) Stage payments will be requested by prior arrangement where planned works take longer than 5 days. We
reserve the right to request from you stage payments in the instance where works take longer than 5 days.
9. DISPUTE RESOLUTION:
a) In the event of a dispute, mediation is to be the preferred method of resolution.
Complete and Return – Materials and works will not commence until the form below has been signed
and returned to Bright Sparks Electrical Ltd or email confirmation has been recieved.
————————————————————————————————————————————————
I confirm my acceptance of the estimate ref. …………………… dated …………………………..
I understand that the estimate is subject to the terms and conditions as outlined above and current at this
date of acceptance. I confirm that full payment will be made to Bright Sparks Electrical Ltd upon
completion of the work. I also confirm that I have been given the statutory right to cancel this contract within
seven days of the date above, provided I do so in writing.
Signature:………………………………………………………… Date:………………………………..
Name:…………………………………………………………….. Tel.no:………………………………
If you have any questions about our Privacy notice, or if you want to know what information we have collected about you, please email us at contact@sparks4u.co.uk. You can also correct any errors in that information or require us to remove your details form any list under our control
Correspondence address:
Bright Sparks Electrical Ltd
110 St Helens Road
Hastings
East Sussex
TN34 2EL
Company Registered Name; Bright Sparks Electrical Ltd. Registration No. 11080523
Tel: 01424 401999